01182482 Oil Pressure Switch for Deutz FL912/913 BF4M1011/1013 BF6M1013/1015 F4L/F6L 912

The Deutz oil pressure switch part number 0118 2482 is used in several Deutz engine series. Below are the key details regarding its fitment, compatible models, and specifications:

Deutz Engines Compatible with 0118 2482 Oil Pressure Switch

This switch is commonly found in the following Deutz engine families:

• FL912 / FL913 (Air-cooled diesel engines)

• BF4M1011 / BF4M1013 (Liquid-cooled diesel engines)

• BF6M1013 / BF6M1015 (6-cylinder variants)

• F4L912 / F6L912 (Older air-cooled models)

• TCD 2012 / TCD 2013 (Turbocharged industrial engines)

Technical Specifications

• Function: Normally Closed (NC) – Opens when oil pressure is reached

• Activation Pressure: Typically 0.5 – 0.7 bar (7 – 10 psi) (used for warning light)

• Thread Size: M10x1.0 (most common) or 1/8″ BSP (varies by engine)

• Voltage Rating: 12V or 24V (compatible with both systems)

• Electrical Connection: Single-pin (standard blade or spade terminal)

Replacement & Cross-Reference

• OEM Alternative: Deutz 0118 2481 (higher pressure variant, ~1.0-1.5 bar)

• Aftermarket Equivalents:

  • Bosch 0 281 002 043

  • Hella 6PT 009 107-001

  • VDO 360-012

How to Verify Fitment for Your Engine?

1. Check Deutz Engine Tag – Locate the model & serial number (e.g., FL912W, BF4M1013E).

2. Measure Thread Size – Use a caliper to confirm M10x1.0 or 1/8″ BSP.

3. Test Old Switch – Check if it’s NC (continuity at 0 psi, opens under pressure).