68002441AA Mass Air Flow Meter Sensor

The 68002441AA Mass Air Flow (MAF) Sensor is a Mopar/OEM part used in Dodge, Jeep, and Ram vehicles with gasoline engines, particularly in the 3.6L Pentastar V6 and other applications.

🔧 Key Details:

• Part Number: 68002441AA (Mopar OEM)

• Replaces Older Numbers: 68002440AA, 68193199AA

• Compatible Vehicles (Common Examples):

  • Dodge Charger (2011–2014) – 3.6L

  • Dodge Challenger (2011–2014) – 3.6L

  • Jeep Grand Cherokee (2011–2013) – 3.6L

  • Ram 1500 (2012–2013) – 3.6L

  • Chrysler 300 (2011–2014) – 3.6L

⚠️ Symptoms of a Failing MAF Sensor:

• Check Engine Light (CEL) (Codes: P0101, P0102, P0103)

• Rough idle, hesitation, or stalling

• Poor fuel economy

• Reduced engine power

• Black smoke from exhaust (running too rich)

🛠️ Replacement Notes:

1. Location:

   • Mounted on the air intake tube, between the air filter and throttle body.

2. Installation Tips:

   • Disconnect the battery before removal to avoid ECU errors.

   • Use a Torx screwdriver (usually T20 or T25) to remove the sensor.

   • Do NOT touch the MAF wires (contamination causes failure).

   • Clean the air filter housing before installing a new sensor.

🔄 Cross-Reference & Aftermarket Options:

• Mopar OEM: 68002441AA, 68193199AA

• Aftermarket Alternatives:

  • Standard Motor Products (SMP) MAF-227

  • Duralast MAF Sensor (check fitment)

  • Bosch 0280218284

❓ Does It Fit a Cummins Diesel?

❌ No – This is a gasoline engine sensor (for 3.6L Pentastar).
✅ For Cummins Diesels (ISB 6.7L, etc.), the MAF sensor is different (e.g., 5WK96785 for some Ram 2500/3500 models).