04223020 Exhaust manifold gasket For Deutz BFM1015 TCD2015 Reinz 71-36756-00

04223020 / 71-36756-00 Exhaust Manifold Gasket – Deutz BFM1015/TCD2015 Specifications

✅ Fitment & Compatibility

Engine Models:

• Deutz BFM1015 (Naturally Aspirated)

• Deutz TCD2015 (Turbocharged)

• Fits both 4-cylinder and 6-cylinder variants

Common Applications:

• Construction machinery (excavators, loaders)

• Industrial pumps

• Marine auxiliary engines

🔧 Technical Specifications

⚠️ Critical Installation Notes

1. Surface Preparation:

   • Must clean manifold and head surfaces to bare metal

   • Remove all carbon deposits (wire brush recommended)

   • Check for warpage (>0.2mm requires resurfacing)

2. Installation:

   • Dry install only (no sealants)

   • Align gasket perfectly with locating pins

   • Follow Deutz torque sequence (center-out pattern)

3. Turbocharged Models:

   • Additional stress relief washers required on TCD2015

   • Must inspect turbo flange for cracks during replacement

🔄 Cross-Reference Numbers

❌ Common Failure Signs

1. Exhaust Leaks:

   • Soot trails around manifold edges

   • Hissing sounds under load

2. Burn-through:

   • Visible holes in gasket material

   • Usually caused by warped manifold

3. Bolt Loosening:

   • Stretch bolts not replaced

   • Improper torque sequence

🔧 Maintenance Tips

1. Replacement Interval:

   • Every 15,000 operating hours

   • Immediately if exhaust leak detected

2. Bolt Procedure:

   • Always use new stretch bolts

   • Lubricate threads with copper anti-seize

   • Final angle tightening critical

3. Post-Install Check:

   • Run engine to operating temp

   • Retorque after first heat cycle

📊 Performance Data

• Thermal Cycles: Rated for 50,000+ cycles

• Compression Load: Maintains seal up to 15kN

• Vibration Resistance: 50G @ 200Hz

❓ Need More Info?

• Exhaust manifold resurfacing specs?

• Turbo gasket replacement procedure?

• Exhaust leak troubleshooting guide?

This high-temp gasket is critical for preventing exhaust gas leaks and turbo efficiency loss – never reuse or install damaged! 🔥🔧